[Tri-folded, but folded twice when used, bills can be stored without folding]

A trifold wallet usually needs to be folded in order to take out cards, coins, and bills. The dritto 3, on the other hand, allows you to take out everything in the folded position.

The dritto 3 is designed to hold up to five cards in its card pocket. (Please adjust the number of cards without printing or with printing depending on the number of cards.) It is possible to put in 5 cards from the beginning of use. Rather, more than 5 cards will cause damage to your wallet.

In addition, one card can be inserted in the back, so a total of six cards can be stored. If you put a traffic system card in here, you can touch your IC card while keeping it in the wallet.

It can hold 15 bills and 6 cards, and is rectangular in shape, 91mm in length and 69mm in width. The thickness is 20 mm (when the coin pocket is not used). It can hold up to 13 coins and keys. (Thickness may vary depending on the thickness of coins and keys.)

[One hook holds two places.]

There is only one hook used in a wallet. However, the special construction allows it to hold the wallet and coin pocket in two places.

This eliminates the need for a hook on the coin pocket and reduces the thickness of the coin pocket.

By lengthening the lid, it will not open even if you put something in it and it expands.

Also, when inserting bills, the coin purse is upside down, but if you support the card pocket with your left thumb, your ring and pinky fingers will naturally touch the coin purse lid, eliminating the risk of it falling out.

[A bill holder that prevents bills from bowing.]

The dritto 3 is equipped with a bill holder so that bills do not bow when the wallet is opened. This eliminates the stress of having to wade through bills to get to cards or coins.

When you want to take them out, you can easily remove them by tilting the lid outward.

[Pinch instead of insert bills].
We adopted the method of pinching the bill instead of putting it in.
The bill is held in the card pocket instead of being held by the metal fittings like a normal money clip.

The card pocket is open except for the center, so there is no worry about the corners breaking. When inserting a bill, simply lift up the card pocket and insert it into the area below the lid holder. The leather floor is polished so it can be inserted smoothly.

Even if it shifts a little, it is no problem and you will not feel any stress.
The coin pocket is the minimum size necessary. If you want to carry more coins, this wallet may not be suitable for you. If you want to carry more coins, we recommend the dritto 2.
If you don't carry coins, you can also use it as a key holder.

[Story]
The development of dritto 3 began with the idea of a wallet that could fit in a breast pocket. With the decrease in the number of smokers, the opportunities to use a breast pocket are decreasing.

If there is a wallet that fits in the place where cigarettes used to be, it would be possible to spend time with nothing but a cell phone in one's pocket. Our goal was to create a wallet the size of a cigarette: 91 mm x 69 mm, which is larger than a cigarette itself, but the same size as a cigarette and a lighter.

It can be placed in a breast pocket, a pants pocket, or a small pocket in a bag. The size of women's bags is getting smaller and smaller, and many women are worried about what to carry with them.
We hope you will choose the compact dritto 3.

Specifications:
Dritto 3
Maximum capacity: 6 cards, 15 bills, 13 coins (adjust contents according to card thickness, etc.)

External dimensions: (approx.) 91 mm (W) x 69 mm (H) x 20 mm (D)

Product weight : (Approx.) 58g

Material ：Cowhide leather (Minerva Box by BADALASSI CARLO, Italy)

Hardware: Brass spring hook (PRYM, Italy)

Country of Origin : Japan

Accessories ：Original box, attention card, instruction card for use

*Note:
The thickness of the leather may vary slightly depending on the lot, so there may be individual differences in size. Minerva Box is dyed to bring out the texture of the raw hides, so there may be scratches, uneven coloring, stains, and wrinkles on the surface.
The surface of tanning-tanned leather is delicate and may have slight scratches or marks left by the sewing machine during the manufacturing process.
Please be aware that the color may transfer by friction due to the dyed finish. Please be careful not to combine this item with light-colored clothing.
Size may vary slightly with use.
The color and surface texture may vary depending on the lot of leather.
The color of the actual product may look slightly different depending on the monitor environment.
*Please note that purchases made from overseas are personal imports and may be subject to the customs duties of your country upon receipt of the goods.