The limitation of the L-zipper wallet. The zipper makes it impossible to make the wallet thinner than the width of the zipper.

The dritto L has succeeded in exceeding this limit by eliminating the zipper.
7mm at the gusset. 5mm at the thinnest part. Even with five cards, the thickness is only 9mm.

This is a thinness that ordinary L-shaped zipper wallets cannot reach.
The thickness of leather is 1.5mm on the outside and 1mm on the inside. It is neither too thin nor too thick.

Two lids, two entrances
Dritto L has flaps on both front and back.

One side provides access to the card slots and the other to the coin purse.
The coin purse is a shallow type for easy access, as the deep type often seen in regular L-zipper wallets is difficult to take out. The dritto L has a shallow change pocket that is easy to remove. The dritto L is also highly visible and easy to remove coins.

Cards are stacked on top of each other. Some wallets are tight at first, but the dritto L can hold up to five cards after you receive it, thanks to its unique card slit structure.

Bills can be accessed from either the coin purse or the card slit.

Change and bills, or cards and bills, can be removed from either entrance.

Bills are folded in half. Many L-fastener wallets that do not require folding are often folded for convenience.

The L-zipper wallets that can be stored without folding take a long time to be stored, and care must be taken so that the edges do not break.

No zipper makes it easy to take out and put in.
A normal L-zipper wallet needs to be symmetrical on the outside in order to have a zipper. This means that you have to wade through the zipper to get to your cards and bills.

The dritto L has an indentation in the body where you can put your fingers. This allows you to take out your cards without hesitation.
There is also an indentation on the coin purse side to make it easier to take out bills.

The card slit side is designed so that the lid stays in place when opened wide.
This allows you to take out and put in bills without being disturbed by the lid.

Thin but sufficient capacity

Holds up to 10 bills, 15 coins, and 5 cards.
This is sufficient storage capacity in today's cashless society.
Those who do not use a coin purse can store their keys in the coin purse.

Unique internal structure like no other
The internal parts of dritto L are made from a single piece of leather.

Normally, when making pockets, etc., the center is folded over and the edges are sewn into a pouch. dritto L, however, has adopted a new structure with a seam allowance in the center and no seams at the edges.

This makes it possible to change the internal parts according to the thickness of the card by using the gusset of the main body as the gusset of the card slit, although the card is inserted into the structure.

Also, since there is one less piece of leather overlapping at the seam allowance, the appearance is sleeker and not as thick when viewed from the side.

The construction with the seam allowance in the center is a rare and unique design.

The stitching is not visible from the outside, but it is hidden in a hidden place.

The Story:
The development of dritto L began with the question of whether it would be possible to make the already well-developed L-shaped zipper wallet thinner.

The idea of eliminating the zipper came to us immediately, but we spent a lot of time on how to close it while maintaining the L shape.

Even after the design was finalized, we made millimeter-by-millimeter adjustments to the actual shape, adjusting the interference between the inside and outside parts and carefully considering how easy it would be to use.

Functional and simple at the same time. The idea of creating a seam allowance in the center of a single piece of leather used for the dritto L is a unique design that we feel is not found anywhere else.

Specifications:
dritto L

Max. capacity: 5 cards, 10 bills, 13 coins (adjust contents according to card thickness, etc.)

External dimensions: (Approx.) W 92 mm x H 98 mm, Thickness: Body 7 mm, Hook 15 mm

Product weight ：(Approx.) 47g

Material ：Cowhide leather (Minerva Riccio, BADALASSI CARLO, Italy)

Hardware: Spring hook (PRYM, Italy)

The outside is made of brass, so the color will change as it is used.

Country of Origin : Japan

Accessories: Original box, attention card, instruction card

*Please note that purchases from overseas are personal imports and may be subject to customs duties of your country upon receipt of goods.