*frill ear cuff* -brass- (2-way ear cuff and ring)
船運
■所有商品將從Orosy位於東京的合約倉庫一起出貨。運費在所有物品到達並包裝後確認。您需要單獨支付產品成本和國際運費。欲了解詳情，請點擊此處。
■平均到貨時間約4週。請注意，如果出現運輸延誤、供應商相關以及任何其他問題。
請聯絡支援人員以取得有關您的運輸狀態的詳細資訊。
■ 所有運往美國的食品和飲料都需要購買者提供FDA 註冊號碼。
沒有 FDA 註冊號碼或無法與我們分享的買家將無法下訂單。
■ 依國家的不同，可能無法運送。訂購前請檢查您所在國家/地區的規定。來自無法出貨地區的訂單將被取消。
-
快點，只有3 件有貨！
無法加載取件可用性
Fluttering and wavy ear cuffs like frills
The randomly wavy design creates movement and a simple yet glamorous impression.
The sides are textured and the outside has a shiny mirror finish, so you can enjoy the difference in texture when viewed from above and from the side.
You can wear it simply as a single piece, or stack two pieces together for a more voluminous look.
You can adjust the size of the ear cuff by widening or shrinking the gap in the cuff.
(We recommend that you pull the ear cuff lightly after putting it on your ear to check that it does not fall off easily.)
It is also cute when worn as a ring by adjusting the size.
Since it is thick, it fits well when stacked with wider rings.
It has no corners, so it fits well on the finger and can be used daily without tiring.
This ear cuff is made of brass, a material that changes in color as it is used.
The dull antique gold color is also austere, and when polished, it becomes a beautiful gold color with a soft luster.
We hope you will enjoy using these ear cuffs while enjoying the color change of the brass material, which becomes more and more attached the more you use it.
[Size]
Diameter approx. 20mm
Width of the wire: approx. 1.6mm
Line thickness: approx. 1.2 mm
*Size 11 to 15 when worn as a ring
[Material]
Brass
Each piece is handmade one by one, so the texture of each piece may differ slightly.
Please understand.
About care
Polishing with an abrasive cloth or a metal polishing cloth will bring out the luster.
The color may turn black due to moisture in the air or perspiration, but it can be polished for maintenance.
*Please do not soak it in hot spring water (sulfuric component), as it may turn black.
*Gold-plated chains should be cleaned by wiping with a soft, non-abrasive cloth to prevent the plating from peeling off.
*The resin part (colored part) can be cleaned by gently polishing with a soft non-abrasive cloth.
